WaveStation Advance User Instructions
WaveStation has the ability to use 6 different channels to ensure
there is no signal interference.
NOTE: Leave these settings set to the factory settings unless
you are experiencing signal interference.
There is a channel selector on the bottom of the Receiving Unit
and inside the battery compartment of the Docking Unit. If the
channels are changed they must be the same on both units.
DIP Switch Channel Settings
Channel 1 – Only DIP switch 2 ON
Channel 2 – Only DIP switch 3 ON
Channel 3 – Only DIP switch 4 ON
Channel 4 – Only DIP switch 1 ON
Channel 5 – DIP switches 1 & 3 ON
Channel 6 – DIP switches 1 & 4 ON
(Note: Only 1 of the DIP switches 2,3,4 can ever be ON at any one time.)
Troubleshooting
If you are experiencing a weak signal first check your batteries, if
it continues change the channel on both WaveStation unit s.
If WaveStation is not functioning properly confirm the Receiver
unit is plugged in and the controller(s) are properly connected to
the Docking Unit.
For technical questions please visit
http://www.pelicanacc.com
or call us directly at 1 -800-331-3844
Changes or modifications not expressly approved by the manufacture
could void the user's authority to operate the equipment. This device
complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions; (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
