installation
21
Mounting the canopy hood
■
First determine the position and
distance with regard to the
mounting brackets. Mark the holes
that must be drilled and drill the
holes.
■
Fix brackets (A) to the wall with the
plugs and screws provided.
■
Screw the hood to the wall with the
plugs and screws (B) provided.
■
On the back of the canopy hood are
2 holes with a diameter of 8 mm for
the 2 plugs/ screws (C) to fix the
hood.
■
Connect the duct.
■
Fit the short cylinder to the
mounting bracket (A) and pull the
long cylinder to the top of the
canopy hood.
■
Screw the chimney in place from the inside of the canopy hood (remove
filters).
Technical specifications
See identification plate for technical specifications.
B
C
A
88015844 HL PSK1086.qxd 21-04-2004 16:47 Pagina 21