Extraction systems
Depending on the type, the cooker hood can be connected in one of two ways:
■
To a duct.
To a duct, the cooking vapours extracted by suction are carried outside, once
the grease particles have been filtered. This is the best method. The cooker
hood is connected to the duct at the top using the outlet flange supplied.
■
Recirculation hood.
As a recirculation hood, the grease particles and
the smell in the extracted vapours are filtered.
The air that has been sucked in is not carried
outside but recirculates in the kitchen, via the T-
piece (B) and the grilles in the chimney (A). In
this case you must have a carbon filter fitted.
Controls
switching lighting on and off
Press the lighting button
.
The lighting comes on.
Press the button again and the lighting goes out.
switching on the fan
Press the
,
or
button.
The extractor hood comes on at the setting selected. The control light in the
middle of the buttons lights up.
3
2
1
use
17
B
A
A
1
2
3
88015844 HL PSK1086.qxd 21-04-2004 16:47 Pagina 17
