EN 8
FAULTS
SYMPTOM
POSSIBLE CAUSE
SOLUTION
Burner extinguishes
after igniting.
The control knob has not
been pressed long and/
or deep enough (at least
3 seconds).
Thermocouple (2) is dirty.
Keep the control knob fully pressed for
at least 3 seconds between high and low
settings. This can take longer the first time
because of the gas supply.
Clean/dry thermocouple.
Ceramic glass plate
broken.
Object fallen onto it.
Close the gas main switch and pull the plug
out of the socket. Contact the your installer.
Please note! Do not throw a broken
ceramic glass plate in the glass recycling
bin but take this to the Municipality's
waste recycling centre.
Summary of Contents for GK864ONY
Page 35: ...DE 11...
