17
Creating a Basic Peleman Box
Open the tray, and lift the protection
frame.
Place your Basic Peleman Box plano
(top or bottom) with the magnet down
on the middle of the table.
Place the Positioning Corners on the
two opposite corners of the Basic
Peleman Box plano.
Place the cover material with the
personalised side up, on top of the
Basic Peleman Box plano. Align it to
the positioning corners.
Lower the protection frame and
close the tray. The display will show
a pictogram blinking. Pressing is in
process.
A beep indicates that the pressing
cycle is over. Open the tray, and lift
the protection frame. Repeat these
steps for the other side of the Basic
Peleman Box.
(gluing the cover material)
