PELEKIS ELECTRONICS
10
ISO9001/2015
Rev. 1.0 June 2017
CONDITION
CONFORMITY
CERTIFICATION BODIES
EMISSION
EN 55022/ΕΝ12015
Anco Lab 1/12/2003
VULNERABILITY
EN 55024/ΕΝ12016
Anco Lab 1/12/2003
ESD
EN 61000-4-2
EMC HELLAS 0044 15/09/2003
INJECT CURRENT
EN 61000-4-6
EMC HELLAS 0044 15/09/2003
MAGNETIC FIELD
EN 61000-4-8
EMC HELLAS 0044 15/09/2003
CONTINUOUS NOISE EMISSION
EN 61000-4-3
Anco Lab 1/12/2003
WAVE TRANSMISSION
EN 61000-4-5
EMC HELLAS 0044 15/09/2003
FAST TRANSIENT
EN 61000-4-4
EMC HELLAS 0044 15/09/2003
Test before startup:
The installer must do the test after installation.
Tests before starting operation should cover the operation of the alarm system.
The control and test of the entire system must be in accordance with relevant standards
of series EN 81.
Compliance EU:
Directive 99/5/EC describes <At the discretion of the manufacturer, the device's conformity with the essential
requirements specified in Article 3 (1) (a) and (b) can be demonstrated using the procedures set out in Directives
73/ 23/EEC and 89/336/EEC. >.
The telecommunication devices which do not use radio spectrum - telecommunications and can take part infor-
mation should be subject to the procedures described in any of the Annexes II, IV or V at the discretion of the
manufacturer.
On standards harmonics:
For electromagnetic compatibility (Directive 89/336/EEC)
For safety (Directive73/23/EC) ANCO SA 20/12/2003
EN 60950 § 2.1.4,2.2.3,6.1,6.2,6.2.1,6.2.1.1,6.3.1,6.3.2
For efficiency, Certificate No. 2667 17/10/2003 OTE SA
TBR21, TBR38 KAI ETS300-001.
For EN 81-28 4,5,6 & 7 EVETAM LF/AC-1155/09.
