Selecting a 4G Communications Network
If when arriving in a new area a different 4G telephone network is required, as
an example, because your currently configured 4G network operator is not
available, the MWB-4G will need to be configured for the alternative 4G
network. By default, as delivered, the MWB-4G is configured to connect with
the Vodafone UK network. To scan for a suitable 4G network, see SCANNING
FOR A 4G COMMUNICATIONS NETWORK below. Once a suitable 4G
network operator is identified for the location, first a 4G enabled SIM card
must be purchased if not already at hand. To change SIM cards
SWITCH
OFF POWER
to the MWB-4G.
WARNING!
Never
eject or insert a SIM card with the MWB-4G powered
ON.
Always
SWITCH OFF power to the MWB-4G before ejecting or inserting
a SIM card.
FAILURE TO SWITCH OFF POWER TO THE MWB-4G
BEFORE EJECTING OR INSERTING A SIM CARD WILL INVALIDATE
WARRANTY AND MAY DAMAGE THE SIM CARD &/OR MWB-4G. NO
RESPONSIBILITY WILL BE TAKEN BY THE MANUFACTURER OR
SUPPLIER FOR ANY DAMAGE SO CAUSED.
Unscrew the SIM port cover, the current SIM card will be seen in the centre
slot. Gently push the SIM card edge into the port and then release. Normally a
click is heard as the SIM card is partially ejected. Carefully remove the SIM
card and store. Insert the replacement SIM card by gently pushing home into
the SIM port with the same orientation as previously (orientation as label
immediately above the socket). Normally a click is heard when the SIM card
locks into the socket. Screw down the SIM port cover and switch on power.
