Peiying Alien PY-GPS5003, User Manual

Page: 11 / 95

3.2 Power on/off
3.2.1 Power on:
3.1.2 Use the car adaptor to charge
WWW.PEIYING.PL 9
ALIEN
[Note] This machine adopts built-in, unchangeable Lithium battery. In order to
avoid fire and burning, please do not poke, bump or take it apart or throw it into
fire or water.
1. Connect the DC part of the adaptor with the power interface at the left side
of the unit (The power interface is same as USB interface );
2. The other part connect to the power socket, it supplies power while
charging.
[
Note
] Please insert the car adaptor after running the car so as not to damage
the machine by electricity collision.
[
Remark
] Red LED indicates it’s being charged. Please wait until it is fully
charged and don’t pull out the adaptor while charging. When it is fully-charged,
the LED will turn to Blue. If low battery or no battery, please charge it
immediately
Power on/off is controlled by [ ] button. Turn off to enter the power saving
mode, it will maintain the last operation status when boot next time.
Please check: The battery is enough, or it is connected to external power
source; Please press the [ ] on the top of the unit to boot.
[Note] If bring the unit form one place to another place, please boot until it
adapts to the environment. Big humidity fluctuation will make the mainframe
short circuited.
PY-GPS5003