Page 12
USE AND MAINTENANCE MANUAL
Rev. 02-18
PLUS
100
AB
GENERAL
To enhance safety and simplify the operator’s work, the
PLUS100 AB system
has two
programming levels; the first level (Level 1) is used to configure the frequently-modified
SET-POINT
parameters. The second programming level (Level 2) is for general parameter
programming of the various controller work modes.
It is not possible to access Level 2 programming directly from Level 1: you must exit the
programming mode first.
KEY TO SYMBOLS
For purposes of practicality the following symbols are used:
•
(
)
the UP key
is used to increase values and mute the buzzer;
•
(
)
the DOWN key
is used to decrease values and force defrosting.
SETTING AND DISPLAYING THE SET-POINTS
1. Press the
SET key
to display the current
SET-POINT
(temperature).
2. Hold down the
SET key
and press the
(
)
or
(
)
keys to modify the
SET-POINT
.
Release the
SET key
to return to room temperature display: the new setting will be saved
automatically.
5.4
CHAP. 5
– Parameter programming
5.5
5.6
