Page
HUM2ESXX CONFIGURATION
HARDWARE CONFIGURATION
Remove the cover over the front hole of the Master HUM2. The Jumper J2 with sensitivity
configuration TA can now be accessed through the hole below.
Set the jumper J2 (fig.1) in the position corresponding to the humidifier model according to 1.
(fig.1)
Jumper J2 has 2 possible positions; the jumper can be connected in position
1-2
or position
2-3
.
Table 1: hardware setting correspondence through jumper J2 and humidifier size.
ES series humidifier model
OEM series humidifier model
J2 Position
400ES3MN
400ES3MOEMN / 400ES3MOEMCN 2-3
400ES6MN
400ES6MOEMN / 400ES6MOEMCN 2-3
400ES6N
400ES6OEMN / 400ES6OEMCN
1-2
400ES12N
400ES12OEMN / 400ES12OEMCN
2-3
400ES24N
400ES24OEMN / 400ES12OEMCN
2-3
400ES48N
2-3
2.1
CHAP.2 CONFIGURATION
3
