Page
HUM2ESXX CONFIGURATION
GENERALITY
The Master HUM2 electronics is the core of the humidifier to which a NANO EasySTEAM display
can be coupled, enabling the displaying of the machine status, the programming and configuration
of the parameters. Connection between display and Master happens by means of a cable with 8-
poles cross-connection RJ45 telephone connector (supplied with display) to be inserted in the two
J1 references. The coupled use of Master and display is the most complete and recommended
method but not the only possible one; once configured, the Master HUM2 electronics does not
require the presence of the display and can be used independently. It is also provided with status
LED and switch (jumper) for the manual discharging of the cylinder.
The 400KHUM2ESXX electronic kit is supplied complete with “nano EasySTEAM” display unit,
masterHUM2, flat connection cable to connect master to display and TA to read the current; it has
been pre-configured for use with ES6 or ES6-OEM humidifier. This configuration can however be
changed by the user by referring to the instructions attached to the controller.
The 400HUM2ESXX electronic kit comes without the display. If needed the display can be added
further on.
PEGO order code
Description
400KHUM2ESXX
KIT Master HUM2 + NANO Display + cable + TA
400HUM2ESXX
KIT Master HUM2 + TA
400HUMESDIS
NANO DISPLAY EASYSTEAM SERIES
CHAP. 1 INTRODUCTION
1.1
2
