Pego 6CIAPE03 Manual Download Page 10

                                                   

6CI

APE03

 

Pag.

9

 

 

Rev. 1-12

 

WARRANTY TERMS

 

The man in cold room alarm kit is covered by a 24-month warranty against all 
manufacturing defects, valid from date of delivery. If the system malfunctions as a result of 
tampering, impact or improper installation the warranty will automatically be rendered null 
and void. It is strongly recommended that you observe all instructions/information 
regarding the technical characteristics of the device. 

Any modifications made to wiring and/or internal components or any work 
carried out in a way that fails to comply with the information/instructions in this 
manual shall render the warranty null and void immediately. 
Modifications/improper work can also cause malfunctions, irreparable damage, 
serious injury or put persons/objects in danger.

 

PEGO S.r.l.

 cannot be held liable for possible errors or inaccuracies written in 

this manual as a result of printing or transcription errors. 

PEGO S.r.l.

 reserves the right to modify its products as it deems necessary 

without altering its main characteristics. Each new release of a 

PEGO

 user 

manual replaces previous ones. 

CHAP. 2 - Installation 

2.6

)

- ENG -

USE AND MAINTENANCE MANUAL

 

Summary of Contents for 6CIAPE03













Reviews: