- 27 -
4 Initial setting
1
5
2
6
3
7
9
4
8
10
Setting the printer (Optional)
1
Press the [MODE] switch.
The display changes to the "Current error display mode".
2
Press the [UP] or [DOWN] switch until
the display changes to the "Printer
output setting mode". (Right figure)
3
Press the [SET] switch.
" " or "
" starts to blink in the
right side of the digital display area.
Icons and start to blink.
4
Press the [UP] or [Down] switch to
select " ".
NOTE
●
"
" or "
" is displayed alternately
by pressing the [UP] and [DOWN] switch.
●
Select "
" when the "Printing" is not
necessary or cancelled.
5
Press the [SET] switch.
The time starts to blink.
1
2 4 6 8 10
3 5 7 9 11
