The offset on the template is designed for a 2° down and 2° right
engine angle. By using the template, it will insure that the prop
hub, on the engine, is in the true center of the aircraft and cowling.
Contact cement the template to the firewall making sure the
template is centered and square.
Use the appropriate drill bit to drill the mounting holes. Engine
mounting bolts and blind nuts are not supplied with your engine.
Use a small amount of blue Locktite on each bolt to insure they stay
tight. The firewall that you are mounting the engine on should be
at least 3/8” thick, 5 ply, birch plywood or equivalent. If the firewall
does not meet these specifications, the firewall will need to be
strengthened. The firewall also needs to have reinforcement where
it attaches to the fuselage structure. Spruce wood ¾” triangular
stock or aluminum angles are good materials for this purpose. The
template also incorporates the mounting hole pattern for the
exhaust ring (exhaust ring mounting bolts and blind nuts are not
supplied with the engine).
WARRANTY
PEGASUS AIRCRAFT ENGINES
warranties this engine to be free
of defects in materials and workmanship for a period of two year.
If the engine fails, runs poorly, produces irregular noise or does not
meet specified RPM, you may send it to the factory or a
PEGASUS
AIRCRAFT ENGINES
authorized warranty station for repair. If
cause of the deficiency is due to workmanship or materials, it will be
repaired at no cost to you except the cost of one way shipping.
This warranty does not cover cosmetic blemishes, discoloration or
finishes. Any misuse, abuse or crash damage is not covered by this
warranty. Any attempts to modify or reconfigure this engine will
void the warranty. Any attempt to repair this engine yourself or by
any other unauthorized person will void the warranty. Use of any
fuel other than that recommended will void the warranty.
