Pegasus 22-15-2094, Translation Of Original Operating Instructions

Page: 97 / 224

MY22P01 - 22_1.0_22.08.2021
96
Operation
6.5.11.2 Adjusting the Suntour fork air suspension
Only applies to pedelecs with this equipment

The air valve is located beneath the air valve
cap on the crown. Twist off the air valve cap .
Figure 110: Screw caps in different designs
1 Attach a high-pressure damper pump to the air
valve .
2 Pump air suspension fork to the required
pressure. Observe the levels in the Suntour
filling pressure table. Never exceed the
recommended maximum tyre pressure
.
3 Detach high-pressure damper pump.
4 Measure the distance between the crown and
the dust seal. This distance is total deflection of
the fork.
5 Push a cable tie attached temporarily
downwards against the dust seal.
6 Put on your normal cycling clothing, including
baggage.
7 Sit on the pedelec in your usual riding position
and support yourself against an object, such as
a wall or tree.
8 Get off the pedelec without allowing it to
deflect.
9 Measure distance between the dust seal and
the cable tie.
 This measurement is the sag. The
recommended value is between 15% (hard)
and 30% (soft) of the total fork deflection.
10 Increase or reduce air pressure until you have
reached the desired sag.
11 If the sag is correct, turn the air valve cap
clockwise.
12 If you are unable to achieve the required sag,
an internal adjustment may be needed.
Contact specialist dealer.
Recommended air pressure (psi)
Body weight
AION35
Mobie 45
Axon34
XCR34
XCR32
Mobie 45 NCX XCR24 XCM-Jr.
<55 kg 35…50 40…55 40…55 40…55 40…55 40…55
55…65 kg 50…60 55…65 55…65 55…65 – –
65…75 kg 60…70 65…75 65…75 65…75 – –
85…95 kg 85…100 85…100 85…100 85…95 – –
> 100 kg +105 +100 +100 +100 – –
Maximum air
pressure
120 145 130 180 100 100
Table 36: Suntour filling pressure table for air forks