Peg-Perego Primonido New Culla, Instructions For Use Manual

Page: 16 / 92

16
Thank you for choosing a Peg-Pérego
product.
The pram Primonido New is available in
the model Culla.
Product characteristics
Pram-auto, Group 0, “Universal” category
• The pram is approved under regulation UN ECE R44/04 for
children weighing from 0-10 kg. It is suitable for installation
on the majority of vehicle seats, but not all.
• The pram can be properly installed if the vehicle's use
and maintenance manual states that it is compatible with
“Universal” Group 0 restraint systems.
• The pram is classified as “Universal” in compliance with
stricter approval criteria than previous models that do not
have this label.
• The device can only be used on vehicles with 2 or 3 rear
seats fitted with 2- or 3-point safety belts, approved in
compliance with UN ECE R16 or equivalent regulations.
• For any questions or further information on installing the pram
in specific vehicles, contact the manufacturer or the retailer.
IMPORTANT
• "The pram” (Group 0) must be fitted perpendicular to the
vehicle’s normal direction of travel.
• Do not fit the pram on vehicle seats that face away or
sideways with respect to the normal direction of travel of
the vehicle.
• The item is given a serial number.
WARNING
IMPORTANT: Read these instructions carefully and
store them in the holder provided throughout the
lifecycle of the product. The child’s safety could be put
at risk if these instructions are not followed.
EN_English
• It could be dangerous to leave your child unattended.
• Assembly and preparation of the item must be carried out
by adults.
• Do not use the product if there are missing or broken parts.
• Before use make sure that all of the attachment
mechanisms are connected properly.
• Do not insert fingers into the mechanisms.
• Do not use near heat sources, open flames or dangerous
objects that are within reach of the child.
• It could be dangerous to use accessories which are not
approved by the manufacturer.
• Make sure the belts fastening the pram to the vehicle are
always taut and adjust the straps securing the child.
• Never twist the belts.
• Replace the item if it undergoes significant strain in an
accident or shows clear signs of breakage or deformation.
• The safety device should not be modified by users in any
circumstances.
• Carefully follow the instructions supplied by the
manufacturer of the child restraint system.
• Never leave the child unattended in the pram in a vehicle.
• The pram must always be secured with the vehicle’s safety
belts, even when the child is not present. In the event
of sudden braking, it could injure the occupants of the
vehicle.
• When travelling in vehicles, never hold the child in your
arms and never put him/her anywhere but in the pram. In
the event of sudden braking, even at low speeds, the child
would be flung forward.
• Take particular care to make sure that luggage or other
objects are not located where they may injure the child in
the pram in the event of an accident.
• Do not leave the pram in vehicles exposed to the sun. Some
parts might heat up and be harmful to the delicate skin of
the child – check before placing the child in the seat.
• Make sure that the pram is not obstructed by any moving
parts of the vehicle’s seat or by one of the doors.
• Do not use the pram without its fabric covering, which
cannot be replaced with one not approved by the
manufacturer since it is an integral part of the pram and
the safety system. If replacing it, use an official spare part.
• The design of the pram features a polystyrene shock