2 of 4
ISSUED: 06-20-03 SHEET #: 009-9023-5 02-23-05
Note:
Read entire instruction sheet before you start installation and assembly.
I
H
Some parts may appear slightly different than illustrated.
A
D
B
G
J
C
K
Description
Qty. Part #
A
top shelf section (24" x 18")
1
009-1037
B
bottom shelf section (24" x 18")
1
009-1038
C
large phillips head bolts
4
520-1177
D
hex nuts
4
530-1014
E
4" casters without brakes (not shown)
2
560-0082
F
4" casters with brakes (not shown)
2
560-0083
G
rubber mat
1
009-1045
H
cord wrap clip (JCT 2642E only)
1
009-1168
I
15' extension cord (JCT 2642E only)
1
600-1011
J
small phillips head bolts (JCT 2642E only)
2
520-1219
K
wingnuts (JCT 2642E only)
2
530-1025
Parts List
• Do not begin to install your Peerless product until you have read and understood the instructions and warnings
contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings,
please call Peerless customer service at 1-800-729-0307.
• This product should only be installed by a qualified professional.
• Unit should be moved by authorized adults only.
• Prior to moving tables, place all AV equipment materials on lowest shelf possible. Secure heavy or bulky equip-
ment to table with safety belts.
• Disconnect all electrical cords from wall outlets and secure to equipment on table.
• Unlock all casters, push mobile table from the narrow side of unit only. Never pull.
• Avoid rough or uneven flooring and remove any obstacles in your path.
• Apply force to the narrow side. Do not pull the unit.
• When set up for stationary use or when loading or unloading equipment, books, etc., always secure the casters
before doing so.
• When using the table as an equipment stand, the equipment should be put on the lowest possible shelf that will
still allow the equipment to operate correctly. The equipment should be placed in the center of the shelf it is
sitting on.
• The product should not be used as a stool or a ladder.
WARNING
