13 of 24
ISSUED: 11-07-13 SHEET #: 180-9044-1
Step 5e
Click on the
Network
sub tab to open the
Network Confi guration
page. This page contains
information about
IP Settings
and
Streaming Settings
. Fill in all
fi
elds in the
IP Settings
section to
match the existing network settings or create custom settings if needed.
Fill in the
fi
eld in the
Streaming Settings
section with the IP address set up for data streaming. If
multiple HDS-PB100 devices are connected on the network, each device MUST have a unique
streaming IP address.
Once all data
fi
elds are complete, click on
Save & Apply
at the bottom right of the screen.
Note:
If IP addresses are modi
fi
ed, open a new web browser and enter the new IP address to con
fi
rm
changes took place.
Step 5f
Click on the
Tools
sub tab to open the
Software Tools
page. This page contains information about
Software Upgrade
and
Factory Reset
. If a software upgrade is needed, click on the browse button
in the Software Upgrade section and choose the upgrade
fi
le to install. Once the
fi
le is installed, click
on
Save & Apply
at the bottom right of the section. If a factory reset is needed
,
click on
Reset
at the
bottom right of the
Factory Reset
section. Once all settings have been saved and applied, content is
now ready to stream to the Broadcaster.