PEELLE 224-EN, Installation & Interface Manual, Page: 31 / 42

27
FREIGHT DOORS
I
CAR GATES
I
CAR ENCLOSURES
T
ECHNICAL
S
UPPORT 1-800-787-5020 ext 275
THE PEELLE COMPANY
®
Guide No.
Date:
224-EN
WIRELESS CONTROLLER
INSTALLATION & INTERFACE GUIDE
May 13 / 2021
Parameter Description Range Landing Pre Set Car Pre Set
Control Interface: set discrete or CAN bus interface
00 = discrete, 01 = CAN
Car Door Designation: 00 = Front, 01 = Rear
(only displayed if Parameter 50 = 01)
53 CmcMedia: 00 = RF, 01 = Wired RS_485 00-01 00 00
54
USING AS REPLACEMENT CONTROLLER
If Parameter 80 is 18 or lower change Parameter 54 to 01
00-01 00 00
55
Lost Communication Reaction Time
04 = 0.4 sec
05 = 0.5 sec
.
.
.
18 = 1.8 sec
04-18 10 10
60 Deceleration rate 01-10 03 03
61 Acceleration rate 01-10 03 03
62 USER 2 Close Limit: set position of the user door close limit 70-99 75 75
63 USER 1 Open Limit: set position of the user door open limit 70-99 75 75
User Limits Setting:
00 = landing door USER limit + car door USER limit sets USER relay
output on car door controller
01 = car door USER limit sets USER relay output on car door controller
65
USER 1 options
00 = USER1 POSITION
01 = USER2 POSITION
02 = ZONE
03 = BUZZ / STROBE
04 = DOOR OPEN POSITION
05 = DOOR CLOSED POSITION
06 = AUX2 INPUT
07 = LCT (BRIDGE MODE ONLY P50=1)
08 = OVERLOAD
09 = OVERDUTY
10 = OVERLOAD / OVERDUTY
00-06 03 00
70 Retiring Cam Ramp Up Time (0.1 second increments) 00-20 N/A 00
71 Retiring Cam Ramp Down Time (0.1 second increments) 00-20 N/A 00
72
Retiring Cam Duty Control
00 = Disabled (contact Peelle if used)
01 = 50% Duty
02 = 75% Duty
00-02 N/A 01
80 Software Version (read only) 2 digits Software Version Software Version
81 Radio Strength 01-31 31 31
82
Motor Duty Control
00 = Disabled (contact Peelle if used)
01 = Standby Duty
02 = Increased Duty
00-02 01 01
83
Motor Overload Control
00 = Disabled (contact Peelle if used)
01 = Default Threshold
02 = Increased Threshold
00-02 01 01
84
Drive Over Temperature Control
00 = Disabled (contact Peelle if used)
01 = Default Threshold
02 = Increased Threshold
00-02 01 01
00
64 00-01 N/A 00
52 00-01 N/A 00
50 00-01 N/A