M
AINTENANCE
Combination Blanket/Fluid Warmer
▪
Operator’s Manual
▪
MN-39930
▪
Rev 2
▪
4/20
41
How to Clean the Warmer
Before you begin
Approved cleaning
agents
▪
70% or greater isopropyl alcohol
▪
PDI Sani-Cloth® HB
Monthly cleaning
procedure
To clean the warmer monthly, do the following.
Step
Action
1.
Make sure
that the warmer is disconnected from electric power and cool.
2.
Wipe
the outside of the warmer with a stainless steel cleaner.
3.
Vacuum
lint from fan openings, fan sail switch, and vent openings.
4.
Clean
the interior of the warmer with a damp cloth or approved cleaning
agent.
5.
Dry
the interior and exterior of the warmer with a clean, lint-free cloth.
Leave
the door open until the interior of the warmer completely dries.
6.
Clean
each side of the window pane with glass cleaner or distilled vinegar.
Continued on next page
WARNING:
Electric shock hazard.
Disconnect the warmer from electric power before cleaning.
WARNING:
Crushing hazard.
An unstable warmer can lead to a crushing hazard. Observe your
facility’s best practices for moving large equipment.
CAUTION:
Burn hazard.
Allow the warmer to cool before cleaning.
NOTICE
Do not use:
▪
abrasive cleaning compounds.
▪
chloride based cleaners.
▪
commercial or household cleaners containing ammonia.
Summary of Contents for P-2147
Page 1: ...Operator s Manual Combination Blanket Fluid Warmer P 2147 P 2150 MN 39930 REV 02 4 20 EN...
Page 58: ......
Page 59: ......
