Peco PRO 2 BAGGER Operator'S Manual Download Page 2

RESIDENTIAL BAGGING SYSTEM

TABLE OF CONTENTS

1.

2.

3.

4.

5.

6.

7.

8.

9.

10.

11.

12.

13.

Read the operator’s manual carefully and familiarize yourself with the proper use of your attachment. Do

not allow anyone who is not acquainted with the Safety Instructions to use your attachment.

Know the controls and how to stop quickly. READ THE OPERATOR’S MANUAL!

Do not allow children to operate the mower. Do not allow adults to operate the mower or grass collection

system without proper instruction.

Be especially watchful of children and pets darting into the area while operating.

Keep your eyes and mind on your unit while mowing or operating your attachment. Don’t let others

distract you.

Do not attempt to operate your unit or mower when not in the driver’s seat.

Always stop unit when emptying the container.

Stop unit, shut off deck attachment, set parking brake, shut off mower engine and remove spark plug wire

before removing clogs, removing or replacing hose, boot, blower cone, or performing any maintenance.

If a slope must be ascended, back up the slope; drive forward when descending.

It is recommended that the container be kept only half full when negotiating any slopes. Start mowing on

slopes when the container is empty and never mow slopes greater than 15 degrees.

Inspect your lawn and remove any foreign objects before mowing. Never deliberately run the mower

across any foreign object.

Wear ear protection if the noise level is offensive.

Wear eye protection to prevent debris from damaging your eyes.

SECTION

PAGE

Safety - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2

Safety Alert Symbols- - - - - - - - - - - - - - - - - - - - - - 3

Warranty - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 4

I    INTRODUCTION AND DESCRIPTION - - - - - - - - - - - - - - 5

1-1 Introduction - - - - - - - - - - - - - - - - - - - - - - - - - 5

1-2 Description - - - - - - - - - - - - - - - - - - - - - - - - - 5

II   INSTALLATION FOR USE - - - - - - - - - - - - - - - - - - - - - - 5

2-1 Preparation Of Mower - - - - - - - - - - - - - - - - - - 5

2-2 Removing The Rear Panel Guard

and The Muffler Guard - - - - - - - - - - - - - - - - - - 6

2-3 Right Frame Mount Assembly Installation- - - - - - 6

2-4 Left Frame Bracket Installation- - - - - - - - - - - - - 6

2-5 Lower Frame Assembly Installation- - - - - - - - - - 6

2-6 PTO Assembly Installation - - - - - - - - - - - - - - - 7

2-8 Exhaust Deflector Installation - - - - - - - - - - - - - 8

2-9 Upper Frame Assembly Installation

2-10 Top Assembly To Upper Frame

Assembly Installation - - - - - - - - - - - - - - - - - - 8

2-11 Blower Cone Installation/Removal- - - - - - - - - - 9

2-7 Belt Installation/Removal/Adjustment - - - - - - - 7-8

SECTION                               PAGE

2-12 Impeller Blade Removal/Replacement - - - - - - - 9

2-13 Boot To Mower Deck Installation- - - - - - - - - -9-10

2-14 Length of Hose Adjustment - - - - - - - - - - - - - - 10

Exploded Views And Parts List - - - - - - - - - - - - -  15-21

2-15 Upper Hose Installation - - - - - - - - - - - - - - - - 10

2-16 Lower Hose To Blower Cone Installation- - - - - - 10

2-17 Lower Hose To Boot Installation - - - - - - - - - - - 11

2-18 Front Weight Installation - - - - - - - - - - - - - - - - 11

2-19 Installation/Removal Of Collection Bags - - - - - - 12

III  OPERATING INSTRUCTIONS - - - - - - - - - - - - - - - - - - - 13

3-1 General Safety - - - - - - - - - - - - - - - - - - - - - - - 13

3-2 Operation & Tips On Mowing - - - - - - - - - - - - - - 13

3-3 Disengagement Of The PTO Assembly - - - - - - - 13

3-4 Unloading The Collection System - - - - - - - - - - - 13

IV  MAINTENANCE- - - - - - - - - - - - - - - - - - - - - - - - - - - - 13

4-1 Maintenance Checklist - - - - - - - - - - - - - - - - - - 13

4-2 Lubrication- - - - - - - - - - - - - - - - - - - - - - - - - - 14

V   PARTS AND SERVICE - - - - - - - - - - - - - - - - - - - - - - - 14

5-1 Parts And Service Information - - - - - - - - - - - - - 14

Safety Decals - - - - - - - - - - - - - - - - - - - - - - - - - - 22

Torque Specifications - - - - - - - - - - - - - - - - - - - - - 23

2

SAFETY

Summary of Contents for PRO 2 BAGGER

























Reviews: