17
GPS
™
2600 SPECIFICATIONS
Rated Power (2 x 2 Ohms)
- 1,300 Watts @ 1 kHz both channels driven at <0.15% T.H.D.
Rated Power (2 x 4 Ohms)
- 950 Watts @ 1 kHz both channels driven at <0.1% T.H.D.
Rated Power (2 x 8 Ohms)
- 650 Watts @ 1 kHz both channels driven at <0.1% T.H.D.
Minimum Load Impedance
- 2 Ohms
Maximum RMS Voltage Swing
- 93 Volts
Frequency Response
- 10 Hz - 100 kHz; +0, -.3 dB at 1 Watt
Power Bandwidth
- 10 Hz - 40 kHz; +0, -3 dB at rated power
T.H.D. (2 x 2 Ohms)
- <0.15% @ 1050 Watts from 20 Hz to 20 kHz with both channels driven
T.H.D. (2 x 4 Ohms)
- <0.1% @ 900 Watts from 20 Hz to 20 kHz with both channels driven
T.H.D. (2 x 8 Ohms)
- <0.1% @ 600 Watts from 20 Hz to 20 kHz with both channels driven
Input CMRR
- > - 65d B @ 1 kHz
Voltage Gain
- x 40 (32 dB)
Crosstalk
- > -75 dB @ 1 kHz at rated power @ 8 Ohms
Hum and Noise
- > -110 dB, “A” weighted referenced to rated power @ 8 Ohms
Power Consumption
- > 1200 Watts
Slew Rate
- > 40V/us
Damping Factor (8 Ohms)
- > 700:1 @ 20 Hz to 1 kHz
SMPTE IMD
- <0.1% 60 Hz and 7 kHz, 900W @ 4 Ohms
Input Sensitivity (x 40)
- 1.54 Volts for 4 Ohm rated power, 1.27 Volts for 2 Ohm rated power
Input Impedance
- 20 k Ohms, balanced
Current Draw @ 1/8 power@ 2 Ohms
- 10 A @ 120 Volts
Cooling
- Two 80 mm DC fans, off until heatsinks reach 45
0
C, then temperature dependant
variable speed
Controls
- Two front panel attenuators
Indicator LEDs
- Two Clip, two Signal, two Active
Protection
- Thermal, DC, turn-on bursts, subsonic, incorrect loads
Connectors
- XLR input, 6.3 mm phone type output patch, Speakon and Binding Post speaker
output, IEC mains input
Construction
- 16 ga. steel reinforced with 12 ga.rack ears
Dimensions
- 133 mm x 483 mm x 432 mm, 400 mm behind rear mounting ears
(5.23" x 19" x 17", 15.75" behind rack ears)
Weight
- 45.7 lbs. (20.7 kg)
Specifications subject to change without notice.
Summary of Contents for GPS 1500
Page 66: ...66 N NO OT TE ES S ...
