– 6 –
vi. INSTALLATION AND OPERATION
1. Move the blade shaft cover upwards. To
remove the blade lock nut, open the shaft
space.
Figure 1.
2. Place the 14
"
blade onto the blade shaft.
Make sure that the directional arrow is
pointing in the direction of the shaft
rotation.
3. Lock the blade lock nut with the outer
flange. Use the multiple wrench provided
to fasten the blade tightly.
To install the cutting table to the machine:
1. Set the cutting table on the rails.
Figure 2.
2. Install the screws and brackets to the
cutting table.
3. To remove the cutting table, do the reverse
of the above two steps.
v. UNPACKING
Open the container. Carefully lift the saw out evenly by the frame. Be certain you have the following
items before you discard the container:
• Saw • Extra air filter
• 14" saw blade • 45º/90º rip guide
• Universal wrench • Owner’s manual
BLADE INSTALLATION
CUTTING TABLE ASSEMBLY
Figure 1
Figure 2
