• Slide off the battery cover.
•
• Replace the battery cover.
Installing and Replacing the Batteries
Replace the batteries whenever the below happen
The shows
The display is dim
The display does not light up
CAUTION
Do not use new and used batteries together.
Do not use different types of batteries together.
Do not dispose the batteries in fire. Batteries may explode or leak.
Remove batteries if the device is not likely to be used for some time.
Worn batteries are harmful to the environment. Do not dispose with daily garbage.
Remove the old batteries from the device following your local recycling guidelines.
Install the batteries as indicated in the battery compartment.
Always use the correct battery type (2×AAA batteries).
Setting Date, Time and Measurement Unit
2.
Press “MEM” button to change the numeral. Each press will increase
the numeral by one in a cycling manner.
1.
When the monitor is off, press“SET” button, it will display the time. Then
hold pressing “SET” for 3 seconds to enter the mode for year setting.
3.
When you get the right year, press “SET” button to confirm and it will
turn to next step.
It is important to set the clock before using your blood
pressure monitor, so that a time stamp can be assigned to
each record that is stored in the memory.
(The setting range of year: 2010~2050, time format: 24H/12H)
8
9
BEFORE YOU START
BEFORE YOU START
