Slave Side Pedal
Main Pedal
. Converting the Main Pedal
To convert the Main Pedal to a Single Pedal, turn the pedal
over and remove the two Flat Head Screws with the
provided Multi-Function Drum Key or Allen wrench (3mm)
and detach the Hoop Clamp (Fig.20).
Modular Post System
The P-3002C features Pearl’s Modular Post System that
allows easy conversion from a Double Pedal to two Single
Pedals.
Remove the four Flat Head Screws under the Left Post with
the provided Multi-Function Drum Key or Allen wrench
(3mm), and detach the Left Post (Fig.21).
Fig. 20
Fig. 21
Reattach the Hoop Clamp in the position shown with two
Flat Head Screws using the provided Multi-Function Drum
Key or Allen wrench (Fig.22). Your Main Pedal is now ready
to be used as a Single Pedal.
Fig. 22
Click Lock
Key Bolt
(Uni-Lock
Footboard
Angle Cam)
Dum Key
Spring
Assembly
Lower Nut
Bolt
. Converting the Slave Side Pedal
To change the Slave Side of a P-3002C Double Pedal into a
Single Pedal, detach the Spring Assembly and the Beater
Holder Link from the Left Post of the P-3002C Double Pedal
and transfer them to the Slave Side Pedal.
To detach the Spring Assembly, disengage the Click-Lock
(Fig.23-a) and remove the Lower Nut (Fig.23-b) and remove
the threaded Bolt from the post. Loosen the Key Bolt
(Fig.23-c) and remove the Uni-Lock Footboard Angle Cam
from the post (Fig.23-d). Gently spread the Click Lock apart
and remove it from the post (Fig.23-e). Use caution to
prevent the Click Lock from deforming. To detach the
Beater Holder Link, remove the Key Bolt with the
Multi-Function Drum Key, open the clamp and remove it
from the shaft (Fig.23-f).
Fig. 23
Beater Holder Link
<a>
<b>
<c>
<f>
<d>
<e>
