Heel Plate
Hinge
Hinge
Flat Head Screw
3-Piece Screw
Bottom Plate
Footboard
Fig. 9
Duo-Deck Footboard
The P-3002C features Pearl's patented Duo-Deck Footboard,
the world's first convertible Short / Long Footboard.
To convert the Duo-Deck to a Long Footboard, turn the
pedal over and remove the four Flat Head Screws with the
provided Multi-Function Drum Key or Allen wrench (3mm)
as shown and remove the Heel Plate and the Hinge from the
Bottom Plate (Fig.9).
Lift the Footboard and remove the four 3-Piece Screws with
the provided Multi-Function Drum Key or Allen wrench
(3mm) as shown, and remove the Hinge from the Footboard
(Fig.10).
Long Footboard
Short Footboard
Fig. 10
Tip
The Duo-Deck is set at the factory in the Short Footboard setting.
Initial
Setting
Uni-Lock Footboard Angle Cam
Key Bolt
Drum Key
Fig. 8-A
Footboard Angle Adjustment
The Footboard Angle can be adjusted by loosening the Key
Bolt on the Uni-Lock Footboard Angle Cam and adjusting it
to the desired angle (Fig.8-A). Re-tighten the Key Bolt to
secure the angle. A gauge on the side of the Angle Cam is
provided to reference Footboard Angle settings (Fig.8-B).
Fig. 8-B
Note
If the Beater is too far from the Bass
Drum Head, the Footboard can
touch the Hoop Clamp and cause
damage to the Footboard and/or the
Hoop Clamp. To prevent damage,
please refer to (Fig.7), and adjust the
Beater angle as shown.
Fig. 7
