CARE & MAINTENANCE:
1.
Keep the water clean – clean water will prolong the useful life of your pump.
2.
Use a pre-filter on your pump if available.
3.
Regular cleaning of the pump will be necessary depending upon the environment in which it is operated. Clean the pump when it is visibly soiled or
when a noticeable drop in performance is detected.
Failure to clean the pump will result in overheating of the pump and the voiding of the
warranty!
4.
Before cleaning, always disconnect the pump from the power source.
5.
Disassemble the pump by removing the inlet screen & the impeller housing. Remove the impeller/rotor assembly by gently pulling on the impeller blades.
Use a soft cloth or brush to clean the area inside of the pump where the impeller/rotor assembly was. Clean the inlet screen, impeller housing & impeller
in warm soapy water. Reassemble the pump and inspect for proper operation.
HINTS & TROUBLESHOOTING:
1.
Ensure that the pump’s flow control switch is set to maximum (+) before operating. Once the flow is established, the pump can be adjusted downward to
the desired level.
2.
If the pump operates, but there is no flow, check to ensure the pump is fully submerged.
3.
If the pump operates, but there is no flow, check the supply tubing for kinks and correct.
4.
If the pump operates, but there is no flow, and if the pump is submerged and there are no kinks in the supply tubing, lift the pump from the water. Remove
supply tubing at pump outlet and clean tubing inside and out if necessary. Reset pump in water (outlet side up) and once water begins to flow, re-attach
the supply tubing.
Pump is replaceable with model # HI-1000. Call Customer Service for replacement parts.
SAVE THESE INSTRUCTIONS!
Each Peaktop product may have variations in texture, finish and appearance from one unit to the next. This enhances the beauty of the product and makes
your Peaktop product uniquely individual. Some products and finishes are intentionally weathered or worn in appearance for aesthetic design.
NOTE:
The diagrams shown are for illustrative purposes only.
Ref. #DE93543
Printed in China
