Your digital insulation tester has a live circuit warning beeper. If it
is connected to a live circuit, a rapid pulsating beep will be heard.
DO NOT proceed to test and immediately disconnect the
instrument from the circuit. In addition your tester will display the
warning message.
1.1. Safety Symbols
Observe the international electrical symbols listed below
Meter is protected throughout by double insulation or
reinforced insulation.
Warning! Risk of electric shock.
Caution! Refer to this manual before using the meter
Direct current
2. Models
PeakTech
®
2680 and 2685
2.1. Four voltages
- 500 V, 1 kV, 2,5 kV, 5 kV (
PeakTech
®
2680)
- 1 kV, 2,5 kV, 5 kV, 10 kV (
PeakTech
®
2685)
* Auto ranging and menu-driven
* A bar-graph which displays the voltage decay during the
discharge of the tested circuit and the voltage stressing the
insulation while the test is in progress.
* A timer which shows the elapsed time when the test was
"ON" and also shows the total time of the test.
-23-
