PCAN-PC/104 – User Manual
39
Appendix C
Quick Reference
Default setting at delivery
CAN channel
IRQ
I/O address range
Comment
1
10
300h – 31Fh
2
5
320h – 33Fh
Dual Channel model only
Software/Hardware Installation under Windows
Install the driver from the supplied DVD. Turn off the computer.
Insert the PCAN-PC/104 card in the PC/104 stack. After switching on
the computer, enter the BIOS setup. In the PnP table mark the
interrupts used by the PCAN-PC/104 card as reserved.
Getting Started under Windows
Run the CAN monitor PCAN-View from the Windows Start menu as
a sample application for accessing the PCAN-PC/104 card. For
initialization of the card, indicate the parameters (I/O base address,
interrupt) and select the CAN connection and the CAN bit rate.
CAN connector (D-Sub, 9-pin)
