39
VII. MAINTENANCE SCHEDULE
Monthly:
1.
Re-torque the anchor bolts to 150Nm;
2.
Lubricate cable with lubricant;
3.
Check all cable connection, bolts and pins to insure proper mounting;
4.
Make a visual inspection of all hydraulic hoses/lines for possible wear or leakage;
5.
Lubricate all Rollers, Safety devices with 90wt. gear oil or equivalent.
Note:
All anchor bolts should take full torque. If any of the bolts does not function
for any reason, DO NOT use the lift until the bolt has been replaced.
Every six months:
1.
Make a visual inspection of all moving parts for possible wear, interference or
damage.
2.
Check and adjust as necessary, equalizer tension to insure level lifting.
3.
Check columns for plumbness.
Summary of Contents for 409A
