Page 32
Problem
Possible Solution
The mass spec is reporting low pressure.
• Check tank pressure is set to factory
settings.
• Check output flow from the Generator is
set to factory settings.
• Check for leaks between receiver tanks
and Generator output.
• Check for leaks between Generator output
and Mass Spectrometer.
• Contact Peak Scientific Technical Help.
Yellow Service Indicator is on constantly.
• Compressor is overdue for service.
• Replace compressor – refer to Compressor
Replacement OR
• Refit compressor.
• Contact Peak Scientific Technical Help.
Yellow Service Indicator is flashing.
• Compressor is overdue for service.
• Replace compressor – refer to Compressor
Replacement OR
• Refit compressor.
• Contact Peak Scientific Technical Help.
Summary of Contents for MS Bench SCI 1
Page 1: ...MS Bench G SCI 1 Service Manual Rev 3 RSID 3025 EN 20 11 20 MS Bench G SCI 1 Service Manual...
Page 33: ...Page 33...
Page 34: ...Page 34...
Page 35: ...Page 35...
