4. While standing in front, lift the Chair by grabbing the left and right
sides of the Seat.
5. Stack each Chair squarely on top of the one below. The base of the top unit
should contact the rubber strip on all 4 legs of the lower Chair.
TO UNSTACK AND PREPARE THE MVe CHAIR FOR USE:
1. While standing in front, lift the Chair by grabbing the left and right
sides of the Seat.
2. Lift the Chair off a base unit and place it on the floor.
3. Verify that the Spring Adjustment Slider/Sliders is in position #4, the top hole in
the Spring Adjustment Slider Guide.
4. Pull the black handles located on the left and ride sides of the Foot Pedal Pivot
Bar toward the center of the Chair and lift the Pivot Bar.
5. Rotate the Pivot Bar toward the rear of the Chair and drop it down against the
Pivot Bar Stops.
Caution: Be sure that the Release Pins on either side of the Pivot Bar fully engage
their respective slots before beginning exercise.
The Chair is now ready for use.
PERIODIC MAINTENANCE:
The Peak Pilates MVe Chair is manufactured using the highest grade materials and requires no periodic maintenance other than cleaning.
We recommend a mild detergent and water solution to clean the vinyl of the seat and the aluminum frame.
The Springs on the MVe Chair must be inspected a minimum of once per month. If the coils show any signs of separating, they must be im-
mediately replaced. Regardless of whether the Spring coils show any signs of separation, the Springs need to be replaced by a maximum of
12 months in use.
TO STACK THE MVe CHAIR:
