Peak PilateSystem
®
Assembly Guide
25
Adjusting the Head Rest
The Head Rest has 3 positions:
• Flat (shown in figure on the right)
• Half Raised
• Fully Raised
To change the Head Rest from the Flat position to the
Half Raised position:
1. Lift and push in on the Head Rest Support Block until
it rests on the first ledge of the Head Rest Support Block.
To change the Head Rest to the Fully Raised position:
1. Lift the Head Rest higher and push in on the Head Rest Support Block.
Caution:
Make sure that the Head Rest is fully seated on the Head Rest Support Block before exercising.
Summary of Contents for Deluxe Reformer
Page 1: ...Assembly Guide Peak PilateSystem Deluxe Reformer...
Page 37: ......
