Peak PilateSystem
®
Assembly Guide
15
Assembling the Tower
1. Place the Tower on the Head End of the machine.
2. The side of the Tower with the 3 lower eye bolts should face the Foot End of the machine.
Assemble the Tower with 8 M6 x 35 mm screws using a 5 mm Allen wrench.
Assembling the Leg Springs
To assemble the Leg Springs (544 mm (21.4 in) long):
1. Attach the open end of the Double Ended Clip to the
ring on the Foot Loop.
2. Store the Leg Spring by hooking it to the lower eye
bolt located in the back of the Tower.
3. Repeat for the second spring.
Summary of Contents for Deluxe Reformer
Page 1: ...Assembly Guide Peak PilateSystem Deluxe Reformer...
Page 37: ......
