20
1. Using the double ended clips, clip the
neoprene handles to the ends of the
ropes.
2. With the gear bar and carriage stop in
position 1, place the handles over the
shoulders posts.
3. Thread the loose ends of the ropes
through the pulleys mounted on the
risers, looping the rope ends back
toward the carriage.
4. Thread the ends of those ropes
down through the hole and the cleat
(near the headrest of the carriage) as
shown in (Fig. 14)
5. Thread the excess rope through the
cutouts underneath metal frame on
the carriage (preventing the end of
the ropes from dragging along the
ground) as shown in (Figs. 15 and 16)
Installing the Ropes
Fig. 15
Fig. 16
Fig. 14
