manualshive.com logo in svg

PE micro Cyclone for STMicro, User Manual

Share
Download
PE micro Cyclone for STMicro User Manual Download Page 7

2

Cyclone for STMicro - User Manual

CYCLONE FOR STMICRO

• Displays operation status

•

Convenient LED Display

• Indicates success or failure

•

Multiple Communication Interfaces

• Ethernet 10/100 baseT

• USB 1.1

• Serial Baud 115200, no parity, 8 data bits, 1 stop bit (adjustable to 

57600 Baud for RS232 controlled production environment)

•

Multiple Storage Media

• 7 Megabytes of onboard storage. Stores data to be programmed, 

programming algorithms, and any necessary configuration settings.

• CompactFlash support available with purchase of CompactFlash 

activation license.

•

Versatile Power Management

• Uses electromechanical relays to automatically cycle target power 

when necessary.

• Jumper-settable power management schemes.

•

Multiple Voltage Operation

• Automatically detects and caters to target voltages ranging from 

1.8V to 5V.

•

Multiple Target Communication Modes

• Supports the following communication modes:

– SWIM Mode

– JTAG  mode

– SWD  Mode

• Automatically detects and caters to target communication.

Summary of Contents for Cyclone for STMicro























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands