Cyclone for STMicro - User Manual
43
CYCLONE FOR STMICRO
Figure 5-11: Image Management And Transfer Dialog
The Interface drop-down list allows the user to select one of three serial, USB,
or Ethernet interfaces. The Port drop-down list allows the user to select from
one of the Cyclones available on that interface. In the case of a Cyclone
present on a different network (i.e., not displayed automatically in the Port
drop-down list), the user may specify its IP address by using the Specify IP
button.
“Store Image to Cyclone” will then store the image on the selected Cyclone.
5.1.7
Store Image To Disk
“Store Image To Disk” allows the current configuration to be saved onto the
hard drive. The image can then be transferred to the Cyclone for STMicro
internal flash or external CompactFlash (with activation) via the Manage
Images Utility.
5.1.8
Save Cyclone Configuration
“Save Cyclone Configuration,” in the file menu, allows the user to save the
configuration into a file, which may be used for future reference, e.g.,
comparing the Cyclone for STMicro contents with the file to see if they are the
same.
5.1.9
Load Cyclone Configuration
“Load Cyclone Configuration” in the file menu allows the user to load a
configuration that has previously been saved in order to create a new image.
5.2
Manage Multiple SAP Images
