7-Inch Local Display
Cntl Nr: PM375107-002
37
4.5.3
Tap Off Box Information Screen
The Tap Off Box Information Screen formats data from the device
’s
points list (Figure 29).
Figure 29 Tap Off Box Information Screen
4.6
Setting up System View
To select which devices will be displayed on the Local Display, touch
Device Enable
on the
System View
Screen. The
Enable
Screen
appears (Figure 30). Touch a device box to toggle between enabled (green)
and disabled (red).
Full Load
is a parameter
defined by the user in the
device points list. Demand
is shown here as percent of
full load.
To next Tap Off Box in
this bus run
To end feed for
this bus run
To Configuration Screen
for this Tap Off Box
Status Light
for this device only:
- Green = No Alarms
- Red = Alarms present on this device
- Yellow = Warnings present on this device
Resets
, touch to reset (see
red boxes
):
- Power
, Clear All KWH
– resets to 0
- Min, Max, Demand
Measurements
– resets to 0
