Communication
Systems Inc.
MODEL NUMBER:
PDI-CV2200
DOCUMENT NUMBER: PD196-171 R1
DESCRIPTION:
PDI-CV2200 Television User Manual
PAGE 10
Pillow Speaker Sound Setup
Proper setup of the TV’s Sound is required for use with a wired
Pillow Speaker. Setup involves disabling the TV’s internal speakers
and then setting the audio level to the pillow speaker.
1.
Press the setup button on the handheld programming remote
control.
2.
From the
Setup Mode
menu, select
Sound
.
3.
In the
Sound
menu, select
Internal Speaker Enable
.
4.
In the
Internal Speaker Enable
menu select the source you
wish to disable. For television select TV.
5.
For Pillow Speakers with a thumb wheel volume control, in the
Sound
Menu, select
Minimum Volume
, and set the level
to approximately 50% to provide a fixed level of sound for the
pillow speaker to adjust.
NOTE: Pillow Speakers with dedicated Volume Up and Volume
Down buttons do not require a Minimum Volume adjustment.
SETUP MODE
■ Service Level Free
■ Picture ▶
■ Sound ▶
■ Channel Setup ▶
■ Features ▶
■ OSD Language English
■ Sources Setup ▶
■ FM Radio Setup ▶
Position:
ST
Exit: SETUP
Next:
WX
Sound
■ Balance 0
■ Minimum Volume 0
■ Maximum Volume 100
■ Power On Volume Last
■ Internal Speaker Enable ▶
■ HDMI Audio Port HDMI
■ Composite / S-Video Sound Mode L + R
Position:
ST
Exit: SETUP
Next:
WX
Internal Speaker Enable
Speaker
■ TV Disabled
■ Composite Video Disabled
■ S-VIDEO Disabled
■ Component Disabled
■ HDMI Disabled
■ PC-ANALOG Disabled
■ FM RADIO Disabled
■ Slot 1 Disabled
■ Slot 2 Disabled
Position:
ST
Exit: SETUP
Next:
WX
Sound
■ Balance 0
■ Minimum Volume 50
■ Maximum Volume 100
■ Power On Volume Last
■ Internal Speaker Enable ▶
■ HDMI Audio Port HDMI
■ Composite / S-Video L + R
Position:
ST
Exit: SETUP
Next:
WX
