PDi Communication Systems, Inc. 40 Greenwood Lane Springboro, Ohio 45066 USA PH 1-800-628-9870 FX 937-743-5664
Document Number: PD196-293R1
PD251-031 Android Based Module
Page 4 of 35
Android Based Module Setup and Usage Instructions
Android Source
Enabling
Before using the module, make sure:
•
In the TV’s SETUP MODE/Sources/Source Enable menu, the
Android Module
is set to “Enabled”.
•
Confirm the TV set is at Enabled/No APO in the
Source Enable
menu.
Waking/Selecting
•
Provided Android is set as the Power on Source, and the Android is sleeping, a short touch of the power button will
turn on the Android based module. (The power indicator light should change from red to green).
•
If Android is not the source displayed, change to the Android source by using the TV/AV or the channel up button to
the highest channel and switching the source to “Android”.
Unlocking
•
Unlock the Android by entering the user password. (See
Lock Screen
section below for entering password or
selecting a new user)
Rebooting
To reboot the module, press and hold the “Power” button for more than 8 seconds.
Keyboard
You should have the PD161-004 PDi wireless keyboard (purchased separately) or other compatible keyboard to use this
module. If you are using the PDi wireless keyboard PD161-004, it will function as any 83 key QWERTY keyboard with
several “Hot” keys.
Hot Keys
Function
Fn/Pair
Pair with Module
Esc
Back one screen
Fn/Home
Home screen
Lock Screen
The starting point for almost all users would be the lock screen (except when turning on the device the first time or after a
factory reset – in which case the device will open to the welcome screen).
On the lock screen, existing users would need to enter their
password to continue.
A new user would start by touching the “I’m a new user”
button.
