5.7 WIRE EXTENSIONS AND ROUTING
PART
SIZE
WIRE
LOCATION
QTY
[1] X AXIS MOTOR CABLE
ALL
ATTACHED
N/A
1
[2] Y AXIS MOTOR CABLE
300x300 AT 4P 30cm FFH
WIRE BAG
1
600x300 AT 4P 70cm FFH
WIRE BAG
1
600x600 6-4P NEMA23 MOTOR WIRE +
4P 70cm FFH + 4P 30cm FFH
WIRE BAG
1
[3] Z AXIS MOTOR CABLE
ALL
AT 4P 20cm FFH. SEE NOTE 2.
WIRE BAG
2
[4] X AXIS LIMIT SWITCH
CABLE
ALL
4-3P WIRE + 3P 30cm FFH
WIRE BAG
1
[5] Y AXIS LIMIT SWITCH
300x300 4-3P WIRE + 3P 70cm FFH
WIRE BAG
600x300 4-3P WIRE + 3P 70cm FFH
WIRE BAG
1
600x600 4-3P WIRE + 3P 70cm FFH + 3P 30cm FFH
WIRE BAG
1
[6] Z AXIS LIMIT SWITCH
CABLE
ALL
4-3P WIRE + 3P 30cm FFH
WIRE BAG
1
.1" HEADER EXT. PINS
WIRE BAG
28
"2" LABEL (OPT.)
R EXTRUDER BOX
2
SPIRAL WIRE WRAP
WIRE BAG
NOTES:
1. IN WIRE DESCRIPTIONS, THE FOLLOWING ABBREVIATIONS ARE USED:
"P" MEANS PIN. "FFH" MEANS FEMALE TO FEMALE HEADER CABLE.
XXcm DENOTES THE LENGTH, IN cm.
2. THE Z AXIS MOTOR WIRES LABELED "SWITCHED" HAVE 2 OF THE 4
PINS SWITCHED. THIS CAN BE IDENTIFIED BY COMPARING THE WIRE
COLORS OF THE ENDS OF EACH CONNECTOR. THE "SWITCHED" WIRE
WILL SHOW 2 WIRES TO BE NOT IN THE SAME ORDER AS THE OTHER 2.
3. THE Z MOTOR WIRE CONNECTOR HAS 5 PINS, AND THE EXTENSION IS A
4-PIN FFH WIRE. LEAVE THE RED WIRE FROM THE 5-PIN MOTOR
CONNECTOR NOT CONNECTED.
4. WHERE "+" IS SHOWN IN CHART, USE HEADER EXTENSION PINS.
SEE NEXT PAGE FOR WIRE ROUTING