3.7 FLIP BED ASM UP AND INSERT Z BEARING RODS
PART
LOCATION
QTY
[1] BED ASM
2.9
1
[2] X IDLER MOUNT ASM
3.5
1
[3] X MOTOR MOUNT ASM
3.6
1
[4] Z BEARING ROD
WRAPPED IN BOX
2
INSERT ROD THROUGH BEARINGS
TRY TO ALIGN ROD AND
BEARING WELL SO BEARING SEAL
REMAINS FREE OF CUTS.
SOMETIMES BALLS ARE PUSHED
OUT OF BEARINGS. THIS IS OK.
TIGHTEN BEARING CLAMP
SCREWS AFTER ROD IS INSERTED.
TIGHTEN JUST SNUG SO BEARINGS
ARE NOT LOOSE IN MOUNT. DO NOT
OVER-TIGHTEN
TIGHTEN LOWER Z ROD
MOUNT SCREWS
TIGHTEN ALL SCREWS ON
TOP OF BUILD PLATFORM
[1]
[2]
[3]
[4]