AEC206 Reference Manual
Ear Simulator and Preamplifier
2-9
TAKE NOTE
Align the gasket slit
with the center of the cavity in
the neck, so the cables run
down into the neck.
Step 6
Place gasket on the neck with cables running down into the
cavity. Place washer on top and screw together with a torque
of 20 oz-in to provide an optimal seal.
Step 7
While turning the screw, squeeze the slit of the gasket
together. After you let go, the slit should be fully closed.
FIGURE 2-14
Secure gasket
Step 8
Liberally grease the edges of the gasket.
FIGURE 2-15
Grease gasket
Step 9
Feed the slack of the cables into the head. Ensure all cables
are all the way in before moving on to the next step, if the
Squeeze the
slit in the
gasket shut as
you tighten the
screw.
