AEC206 Reference Manual
Ear Simulator and Preamplifier
2-8
Step 3
Using the 2.5 mm hex driver, unscrew the washer/gasket
screw completely. Pull off assembly, and then separate the
washer from the gasket.
FIGURE 2-12
Remove Gasket
Step 4
Place head next to stand. See Figure 2-13.
Step 5
Measure approximately six inches of cable starting from the
neck insert and running down, and at that spot gently push
the cables into the gasket as shown below. The length of
cable between the gasket and neck insert should be ~6 in.
FIGURE 2-13
Insert cables into gasket
