Brought to you by PCS Electronics, www.pcs-electronics.com
Cybe program explained
Main amplifier parameters are presented in this dialog, they are described below:
Fig. 17: Amplifier setup
Amplifier output power
Set power in % here, from 0 to 100%.
Alarm levels
You can set values at which various alarms trigger.
Output power and reflected power
Shows output and reflected power in watts.
Update amplifier button
Click to send settings to the amplifier
Systray
Click to send program to tray where it stays hidden until you need it.
ToTray at start
Check
To tray at start
checkbox to start the program minimized in system tray.
Auto read status
Check this box to activate automatic continuous hardware status reading.
RF amplifier status
Shows various currents and voltages inside the amplifier.
Alarm indicator buttons (SWR ALARM, PSU T ALARM and others)
These light-up when an alarm is triggered in the amplifier. Must be connected to amplifier and auto read enabled for this to
work.
Firmware version
This is the firmware version of your FM transmitter board. For this to display you need to read data from the transmitter at
least once (Read TX or Auto read TX).
Update logo
Changes the welcome text when you power-up the amplifier. This feature is experimental so we don’t give you any warranty
for changing logo – welcome text.