FW5 FloW Building Instruction Juni 2010
8. Installation of the throwing blade
Alignment
Side
view:
Tilt
the blade
on the upper side
of the wing a little bit
in the
direction of flight.
Front
view:
Mount the blade
right-angled to the wing
.
View
from above
:
Turn the axis
of the blade a little bit
to the fuselage
(looking
in direction of flight).
Grind the blade, so that it gets an
aerodynamical cross-
section
and it
feels handy
when you hold it in your fingers.
Don't make the trailing edge too sharp. You might injure
yourself when throwing your DLG.
Lay the
paper
template
on the
wingtip and
thrill a
hole at the marked
spot.
(Both wingtips - left
and right - are
prepared for the
installation of a
throwing pin or
blade.)
Mark the length
of
the blade.
Remember, that the
axis of the blade
should be turned a
little bit to the
fuselage (looking in
direction of flight).
www.pcm.at
17
