FW5 FloW Building Instruction Juni 2010
7. Controlling the ailerons
Anlenkung des
Ruders
Bend, press and
grind
the
brass
pipes
according to
the picture.
Drill holes with a
diameter of
1mm
for
hooking in the push
rods.
Glue the brass levers
with thickened
epoxy glue or
epoxy resin
to the
wing.
The levers should be
situated as
near
as
possible
to the
turning axis
of the
aileron.
View from below:
You see the brass
levers standing out.
The 2
nd
picture
shows the fuselage
with its whole for
mounting the wing.
Use a
pair of
tweezers
to mount
the levers through
this whole.
www.pcm.at
15
