Erwin XL
slope
building Instruction
August 2018
www.pcm.at
3
DATA
1. Kit
– Contents
Fuselage, in two parts, incl. canopy and cover for end of fuselage
Wing, in two parts
V-Tail
Covers for servos on wing, 4 pieces
Levers for rudders, 4 pieces
Servo board
Assembly board for hook for winch start
Ball connectors for the elevator, 2 pieces
Brass pipes for the elevator, 2 pieces
Pipes and push rod, 2 pieces each
Threaded coupler, 2 pieces
Plugs and frames for connection of wing and fuselage, 4 pieces each
Screws, 2 pieces, for fixing the V-tail
Connectros / ballast (more ballast available on demand):
Segler / Glider
Elektro
Normal (Slope)
2x Kohlestab /
carbon rod
2x Stahl kurz /
steel short
1x Stahl lang /
steel long
(auf Anfrage / on demand)
2x Kohlestab /
carbon rod
Medium
1x Kohlestab /
carbon rod
2x Stahl kurz /
steel short
1x Kohlestab /
carbon rod
1x Stahl kurz /
steel short
Ultralight
1x Kohlerohr /
carbon pipe
1x Koh Stahl innen /
carbon pipe + steel core
1x Stahl kurz /
steel short
1x Kohlerohr /
carbon pipe
Building instruction (please download from our homepage)
2. What else do you need:
Controls of the wing:
Connectors for push rods, M2,5mm, 8 pieces
Welding rod, d=2mm
Steel wire 1,5mm, 0,8mm
Hook for winch start and nut
On-off switch / socket for loading
Cables (electricity)
Cable for antenna, possibly steel wire for extension of
antenna
Plugs
Epoxy-glue (for example UHU 300 endfest or Stabilit, no
fast hardening epoxy resin)
Cotton flocks to thicken glue
Hook for winch start
Connector for push rods, M2,5mm
