Erwin XL
slope
building Instruction
August 2018
www.pcm.at
12
BEFORE THE FIRST FLIGHT
10. Ballast system
You can easily change the
weight
by
varying
between the
different connectors
.
You should always use
two connectors
when flying
Erwin XL slope
.
If the glider accel
erates too slowly, don’t hesitate to add further weight. Erwin XL slope can do well
with more weight, in the air as well as when landing.
(Photos made from an older version of the root rib.)
2x carbon short, 150g
1x carbon short, 1x steel short, 450g
1x steel short, 1x steel long, 1125g
2x steel long, 1500g
(Order an additional steel bar if you need it)
