Trunking
This page is used to set trunk group for load balance and
auto-backup.
The smart switch supports two trunk group, each trunk consists of
2~4 ports. Trunk hash algorithm can be selected according to 4
different methods.
Port ID:
Among the trunk member ports, the packet will be
distributed based on the port ID.
SA:
Among the trunk member ports, the packet will be
distributed based on the source MAC address.
DA:
Among the trunk member ports, the packet will be
distributed based on the destination MAC address.
DA&SA:
Among the trunk member ports, the packet will be
distributed based on the XOR calculation result of the
source MAC address and the destination MAC
address.
